1 1

Remote Store Australia

Boss Guardian Steel Line Compatible Remote

Boss Guardian Steel Line Compatible Remote

$13.96 AUD
$13.96 AUD
Sale Sold out
Shipping calculated at checkout.

The product that you will receive is the item that is being pointed to by the arrows which is an aftermarket compatible remote.

Compatibility:

  • BOL4
  • BOL6
  • BOL9
  • OL4
  • OL6
  • OL9
  • BRD1
  • BRD9
  • 2211-L
  • 2211-L (TX)

Please Note: Not compatible with older remotes that contain DIP switches (small switches inside the remote)

Please Note: Not compatible with motors on 433MHz (generally motors installed after 2014)

Please ensure that your original remote is pictured and your motor model number is listed to ensure compatibility.

Remote Includes
  • Free Battery
  • Free Keychain
  • Heavy Duty Design
  • In-built Battery
  • Button Protector

 

BOSS/Guardian/Centurion/Lynx/Steel-Line Instructions

Wall Mounted Motors

1.Remove the faceplate of your wall mounted motor control panel. On the bottom centre of the grey faceplate will be a tiny slot that allows you to insert a flat screwdriver to remove the cover.

2.Once faceplate is removed, locate the radio set/learn button (small circle red or black button) and push it once. A light will illuminate to indicate your motor is ready to accept a new remote.

3.Press any button on your new remote that you wish to operate the door once and release. The learning light on the motor control panel with blink to indicate the code has been learnt.

4.Push the learn/code set button once and release. Test the remote and place the faceplate back onto the motor control panel.

 

Ceiling Mounted Motors

1.Locate the radio set/code set/learn hole that is usually located on the rear of your motor.

2.Once located push a small pointed object into the hole and push the buttononce. A light will illuminate to indicate your motor is ready to accept a new remote.

3.Press any button on your new remote that you wish to operate the door once and release. The learning light on the motorwith blink to indicate the code has been learnt.Press the Radio Set/Learn/Code set button once and release. Test the remote.

View full details